05: Rigging Bench

Between The Lines - Ch 05: Rigs

0505_benchtop

  The Rigging Bench

0505_01_Heavy8Crimps   0505_02_AllyCrimps

1: Heavy Walled Binocular Swages

Mainly used for heavy wire. Shorter crimps, or swages must be heavier gauge to secure wire effectively.

 

 

2: Aluminium Tube Crimps

These are used for crimping nylon leaders.

0505_03_ShrinkWrap   0505_04_Metal8

3: Shrink Wrap

Heat Shrink tubing is easy to use for various tasks such as restrictions to lessen the chance of hooks fouling.

 

 

4: Standard Binocular Crimps

Also known as Figure 8 swages are used mainly for wire cable.

0505_05_TapeMeas   0505_06_Files

5: Tape Measure

The tape measure should be able to measure long leaders up to 30 feet.

 

 

6: Files and Honing Stones

Keep files and honing stones handy for touching up hook points.

0505_07_Thimbles   0505 08 Shackles

7: Thimbles

Thimbles are usually used on wire or nylon at the rig end of the leader where there is a high risk of damage.

 

 

8: Shackles

Shackles are a good way of joining things to each other such as hooks to leader as they are very small and very strong, and allow quick and easy changeover of leaders or hooks.

 

0505_09_Ballcock   0505_10_springs

9: Rubber Washers

These are used to stop the back of the lure damaging the nylon leader where it enters the crimp.

 

 

10: Chafing Springs

These small stainless springs are used to protect nylon end loops.

0505_11_Tubing   0505_12_ParrotBeak

11: Chafe Tubing

Any form of nylon or Teflon tubing can be used for chafe protection.

 

 

12: Parrot Beak Wire Cutters

Parrot beaked wire cutters make a very neat, clean cut in wire and nylon making it easier to fit tight crimps.

 

0505_13_Lures   0505_14_LeaderWire

13: Lures

Try and rig similar sized lures at the same time as you can process items much more efficiently.

 

 

14: Leader and Wire

Try to be consistent with the range of wire and leader types and sizes as this makes it easier to fit the right sized crimps.

 

0505_15_CrimpingPress   0505_16_HeatGun

15: Multi Crimping Bench

There are many types of crimping tools each with their own capabilities. This one can do many sized crimps. The jaws are quite narrow which is good for light tackle rigging.

 

 

16: Heat Gun

Heat guns make using heat shrink tubing very easy as it heats the areas evenly.

0505_17_BenchCrimpCut   0505_18_WireJigRiiging

17: Bench Crimper with Cutter

A heavy duty bench crimper with wire cutter makes using the wire jig very easy. The narrow jaws mean that larger crimps need multiple pressings.

 

 

18: Wire Jig

Using a jig is an easy way of measuring wire consistently.

 

0505_19_Hooks   0505_20_OldSeargents

19: Hooks

Hooks should be sharpened and checked for cracking or corrosion before being used in rigging.

 

 

20: Spring Loaded Flat Jawed Pliers

These pliers are used for holding wire taut when crimping.

 

0505_21_spikes   0505_22_CrimpingPress

 21: Spikes

An assortment of spikes is used to form round loops in wire of consistent size.

 

 

22: Wide Jaw Crimping Press

This is a heavy duty bench press for medium and heavy tackle rigs and leaders. The jaws must be changed for each size crimp.

0505_23_Cutters   0505_24_CrimpingPliers

23: Nylon Cutters

Neat cuts are essential for fitting correct sized crimps. Use specific cutters just for nylon.

 

24: Hand Crimping Pliers

Each type has it's own advantages such as incorporating wire cutters and doing varying crimp sizes with various sized jaws.

logo_100


Comments powered by CComment

Image
Australia, Brisbane
Logos, lure names, colour names and markings are the Intelectual Property, Trade Marks and Copyright of Peter Pakula, Pakula Tackle Australia Pty Ltd and Gamefish Central Pty Ltd. All designs, text and drawings are by Peter Pakula used with permission by Pakula Tackle Austrlaia Pty. Ltd. and Gamefish Central Pty. Ltd. All Rights Reserved 1985.
Developed and Maintained by ASKAN TECHNOLOGIES